Cost of Installing a Bathtub
There are many factors to consider before you decide to install a new bathtub. These include the cost for a plumber and an electrician, the cost of having your plumbing system re-plumb to accommodate a standalone bathtub, and the materials used to make bathtubs. Getting an accurate estimate is essential for determining the overall cost of the project.
Cost of hiring a plumber
The cost to hire a plumber for a new bathtub installation depends on the complexity of your project and the labor required. A simple replacement can cost you between $100-$2,000. If you want to install an alcove or jetted bath, however, the cost can go up dramatically. This is because the new plumbing will have to be added to the existing plumbing, which can be labor-intensive and expensive. A plumber will also be required to frame the new plumbing within the walls and take out the old plumbing.
Before you decide to hire a plumber, you should collect as many price quotes as possible in your area. By collecting these quotes, you will have a better idea of the typical price for a bathtub installation in your area. Moreover, you should ask the plumber how long it will take to install a bathtub.
Cost of hiring an electrician
An electrician is required to install a bathtub or jetted tub in your house. An electrician can charge between $40 and $100 an hour. The process can take anywhere from two to six hours. This cost will depend on whether the wiring is new or not. It is recommended that you hire an experienced licensed electrician to do this job.
Most electricians charge a high rate for the first hour. They don’t want the electrician to spend the whole day on a small job. You can hire an electrician to repair an outlet for $200 to $225 in some cases. But, it is best to wait until you need other electrical work before you hire an electrician.
Re-plumbing of your plumbing system to fit a standalone bathtub will cost you approximately $800
Re-plumbing your plumbing system to fit a standalone bathtub costs about $2,000, including materials and labor. The scope of the project will determine how much this can vary. An average hourly rate for a licensed plumber is $35 to 80 depending on where the work is being done. This includes rerouting plumbing lines and installing drainage systems. In some cases, you may need to re-plumb an entire bathroom or modify fixtures.
Replacing an existing bathtub with a standalone tub is usually relatively inexpensive if you are replacing like-for-like. However, costs can rise quickly if you want an alcove bathtub replaced with a cast iron bathtub or a freestanding tub with jetted bath. This is particularly true for installations where the existing plumbing configuration needs to be changed. For the installation of new fixtures or to modify existing plumbing, a plumber can charge as high as $45 an hour. This work is labor-intensive and plumbers must frame new pipes within walls.
Materials used in bathtubs
Today’s bathtubs can be made from a variety materials. Fiberglass is the most widely used and affordable, but there are also luxury options. Fiberglass bathtubs are made from hardened plastic that is then coated with an enamel-like film. These tubs have a long life and can be recycled. They can also be very easy to clean, making these tubs a great option for those with tight budgets. Cast iron is another type of material. A cast-iron bathtub is made from molten iron that is coated with an enamel-like layer.
Also, the cost of enamel-coated steel tubs is very affordable. Enamel-coated Steel is made from a thin steel sheet that has been coated with porcelain enamel. Enamel-coated steel tubs are also easier to clean than fiberglass. Porcelain tubs also tend to last longer than fiberglass and acrylic tubs. These tubs can also have a ceramic tile surround for a stylish appearance.
Other factors that influence the cost of installing bathtubs
There are many factors that will affect the cost of installing your bathtub. For example, the type of tub you choose can make the process more costly. The weight of a cultured marble bathtub can be higher than a standard tub, and plumbing changes may need to be made in order to install it. This could add $150 to $1,900 to the total cost.
If you choose a jetted bathtub, you may need to replace the electrical panel or install a separate one. This may cost an additional $530 to $1,962 and may require a licensed electrician. Also, you may need to remodel your bathroom if you choose a walk-in tub. This renovation typically costs around $100 to $200 per square foot.